An electric shock is due to the electric leakage which results from a lot of damage to appliances and also causes injury to humans even leads to death. Forty-two percent of total fires occur due to electrical sources and eight percent of deaths that occurs in Indian factories are due to electrocution. When a part of the body gets conduct between two conductors or between a conductor and a grounding source, it forms a complete circuit and results in electrical shock. Each year, the result of electrical accidents is more than 12,306 crores in property damage in home and industry. To overcome these problems, our project gives a better solution. Electric shock or accidents can be prevented by the proposed system. Whenever the human is electrocuted, the electric shock is detected and then the sensed signal is transmitted to the microcontroller using the RF transmitter and receiver. The microcontroller is used to detect the signal from RF receiver and then the microcontroller passes the control to relay which will trip the main board. Then the alarm sounds as it is alert for the nearby users. It also gives the alert message to the authorized person using GSM. With the help of IoT technology, the exact location and time information can be found and the electric shock information is stored for data records. This proposed system helps to find the electric shock and to avoid the untoward incident happening in the home or industry and saves the human life.